• AUTOMOTIVE TECHNOLOGY

     

     

     

    0209 Basic Automotive Technology

    19 Sessions/57 Hours

    Instructor: B. Wenzel

    Tuition: $550.00

    Additional Cost: Textbook purchase and $70.00 Material Fee

    09/21/2015 – 11/25/2015 Mondays and Wednesdays 6:00 pm – 9:00 pm

    Students will receive class theory and hands-on training in the following areas: Brake rotor/drum resurfacing and critical measurements, introduction to anti-lock brake systems and diagnostic procedures, intro to specialty measurement tools, diagnostic hand-held scanners as well as computerized engine control system and electronic and computerized ignition systems will be covered.

     

    0211 Chop Shop-Autobody

    10 Sessions/40 Hours

    Instructor: B. Kohler

    Tuition: $450.00

    Additional Cost: $100.00 Material Fee (sandpaper, filler, welding materials) parts, primer and paint is at student’s expense.
    9/15/2015 – 10/20/2015 Tuesdays and Thursdays 5:00 pm - 9:00 pm
    Do you have a project vehicle in need of repairs or would like to modify your vehicle? This is the class for you! Come and enjoy our open ended shop environment that offers hands-on learning. What you learn is up to you. From basic welding, sheet metal fabrication, light mechanical swaps, all the way to dent repair and even painting! Bring your projects and an open mind. *Students must have safety glasses and safety boots.*

     

     

    0210 Diesel Maintenance

    10 Sessions/30 Hours

    Instructor: K. Hart

    Tuition: $300.00

    Additional Cost: $100.00 Material Fee

    10/20/2015 – 11/24/2015 Tuesdays and Thursdays 6:00 pm - 9:00 pm

    This course will provide the technician, beginner or advanced with a basic understanding of the maintenance on today's diesel powered equipment.  At the conclusion, students can apply as entry level diesel maintenance technicians. Student will complete the program and retain ownership of a filter wrench, tread depth gauge, hydrometer, ½ breaker bar and 6” extension.

     

     

    0208 PA Motor Vehicle Safety Inspection

    5 Sessions/20 Hours

    Instructor: S. King

    Tuition: $185.00

    Additional Endorsements: $40.00

    Monthly Tuesdays and Thursdays 6:00 pm - 10:00 pm

    Requirement: Tuition paid in full at registration. Please specify the month you are interested in at time of registration.
    This program is for those who seek certification from PA Department of Transportation as an inspection mechanic. This course is offered once a month pending adequate class enrollment. Students must have a valid license in the category in which certification is sought.

     

     

     
     

    COMPUTER

     
     

    0402 Introduction to Google Drive

    6 Sessions/18 Hours
    Instructor: A. Vasquez
    Tuition: $145.00
    10/26/2015 – 12/07/2015 Mondays 6:00 pm – 9:00 pm
    Students will learn how to create, store and manage files. Access files anywhere using the CLOUD. Learn how to use google on your mobile device and your computer. Store your documents, photos, music, videos, all in one place. It syncs with your mobile devices and your computer.

     

    0407 Microsoft Office Word Basic
    7 Sessions/21 Hours
    Instructor: A. Vasquez
    Tuition: $155.00

    Additional Cost: Textbook purchase
    9/9/2015 – 9/30/2015 Wednesdays and Thursdays 6:00 pm – 9:00 pm
    Students will learn introductions to word basics, creating and editing business letters and memorandums, and creating a simple report.


    0411 Microsoft Office Word Intermediate
    7 Sessions/21 Hours
    Instructor: A. Vasquez
    Tuition: $155.00

    Additional Cost: Textbook purchase
    10/7/2015 – 10/29/2015 Wednesdays and Thursdays 6:00 pm – 9:00 pm

    Students will learn to create research papers, using mail merge, creating a newsletter, and working with tables.

     

    0401 Getting Started with your Computer
    6 Sessions/18 Hours
    Instructor: A. Vasquez
    Tuition: $145.00

    Additional Cost: Textbook purchase
    9/14/2015 – 10/19/2015 Mondays 6:00 pm – 9:00 pm

    Welcome to Windows 7, your complete introduction to Microsoft’s newest operating system and all its exciting new features. Students will learn how to manage windows and folders, run programs and much more.

     

    0416 Adobe Photoshop
    8 Sessions/20 Hours
    Instructor: E. Fader
    Tuition: $165.00

    9/8/2015 – 10/1/2015 Tuesdays and Thursdays 6:00 pm – 8:30 pm

    An introduction to Photoshop, this beginner class will see students become familiar with the tools, palettes, effects, filters and terminology associated with this graphic arts program used to edit scanned and digital photographs

     

     


     

    CULINARY

     
     

    0600 ServSafe & Certification Test
    3 Sessions/14 Hours
    Instructor: STAFF
    Tuition: $185.00
    Additional costs: Textbook purchase
    CALL FOR MORE INFO

    This is the complete certification training course designed by the National Restaurant Association and is the only certificate recognized by the state of Pennsylvania to conform to this standard.

     

    0602 Basic Cake Decorating
    8 Sessions/24 Hours

    Instructor: Staff

    Tuition: $195.00

    Material fee: Students will purchase materials from a list provided by instructor on first night of class.

    10/13/2015 – 11/19/2015 Tuesdays and Thursdays 6:00 pm - 9:00 pm

    Bring your own cake as required by the instructor. Students will learn basic icing, flowers, borders, combing and air brush instruction. Two-tiered and seasonal cakes as well as icings and a variety of fillings will be covered.

     

    1600 Comprehensive Culinary Program
    Year-long Program

    Instructor: Dr. G. Hendry

    Tuition: $3,500.00

    Additional Cost: Textbook purchase and $850.00 Material Fee

    Start Date: 1/11/2016 Mondays and Tuesdays 6:00 pm - 9:30 pm

    The curriculum and labs incorporate food safety and sanitation, knife skills, nutrition, cooking techniques, stocks, sauces, soups, meat, poultry, fish dairy, pasta, vegetables, fruits, garde manager, herbs and dining room management, marketing, and menu preparation as well as the elements of restaurant practices. These classes will be taught in specific modules or as a complete package.

     

     
     

    FULFILLMENT


     

    1000 GED Preparation

    12 Sessions/36 Hours

    Instructor: M. Wilson

    Tuition: $275.00

    Additional Cost: Textbook purchase

    9/21/2015 – 12/14/2015 Mondays 5:30 pm – 8:30 pm

    The GED Preparation class is an individual course that is tailored to the specific needs of each student. After a pre-test given on the first two nights, students are placed into an educational program based upon the placement testing.

     

    0107 Piano and Keyboarding

    10 Sessions/36 Hours

    Instructor: G. Nance

    Tuition: $295.00

    9/9/2015 – 10/8/2015 Wednesdays and Thursdays 5:30 pm – 9:30 pm

    Students will learn to read sheet music and play songs in various music styles. Continuous learning is applied with each lesson building upon the other. Bring your own keyboard or one will be supplied.

     

    0804 Guitar Intro (Build a Guitar)
    8 Sessions/16 Hours
    Instructor: J. Naegle
    Tuition: $175.00
    Additional Cost: Students may purchase guitar kits if they would like to build their own acoustic guitar.
    09/9/2015 – 10/28/2015 Wednesdays 7:00 pm – 9:00 pm

    This class will also cover guitar repair, Fixing electric guitars, amps, cabinets electronic processors and building and fixing cables. Students will have the option to build their own acoustic guitar!


    0805 Guitar Performance Intro
    8 Sessions/16 Hours
    Instructor: J. Naegle
    Tuition: $175.00
    09/14/2015 – 11/9/2015 Mondays 7:00 pm – 9:00 pm

    This course is designed to get students to play the guitar and become a better well rounded literate musician. All students are at one of the three levels: beginner, intermediate and advanced. This class is group style with some one on one instruction. Students will need to practice and play on their own to improve.


    0806 Guitar Performance Advanced
    8 Sessions/16 Hours
    Instructor: J. Naegle
    Tuition: $175.00
    Additional Cost: Material Fee to be determined
    11/3/2015 – 12/22/2015 Tuesdays 7:00 pm – 9:00 pm

    This course is designed for advanced students. Students will be expected to audition before gaining entry into the class. Students will be expected to log practice units (ie 4 hours per week)

     

    0903-1 Holiday Door Wreath
    1 Session/3.5 Hours
    Instructor: L. Schuttert
    Tuition: $45.00
    Additional Cost:
    12/1/2015 Tuesday 6:00 pm – 9:30 pm

    Students will learn how to create a door wreath for the holiday. Students should bring any items they want to decorate their wreath. Students will leave with a decorated wreath they created by hand.


    0903-2 Holiday Door Wreath
    1 Session/3.5 Hours
    Instructor: L. Schuttert
    Tuition: $45.00
    Additional Cost:
    12/3/2015 Thursday 6:00 pm – 9:30 pm

    Students will learn how to create a door wreath for the holiday. Students should bring any items they want to decorate their wreath. Students will leave with a decorated wreath they created by hand.

     

     

    0902 – Thanksgiving Centerpiece
    1 Session/3.5 Hours
    Instructor: L. Schuttert
    Tuition: $45.00
    Additional Cost:
    11/23/2015 Monday 6:00 pm – 9:30 pm

    Students will learn how to create a centerpiece for the Thanksgiving holiday. Students should bring any items they want to decorate their centerpiece. Students will leave with a table centerpiece they created by hand.

     

    0904 – Holiday Centerpiece
    1 Session/3.5 Hours
    Instructor: L. Schuttert
    Tuition: $45.00
    Additional Cost:
    12/21/2015 Monday 6:00 pm – 9:30 pm

    Students will learn how to create a centerpiece for the Thanksgiving holiday. Students should bring any items they want to decorate their centerpiece. Students will leave with a table centerpiece they created by hand.


    0901 – Adding Fall Bulbs for Spring Color
    2 Sessions/4 Hours
    Instructor: L. Schuttert
    Tuition: $75.00
    Additional Cost: Bulbs may be purchased on last night at an additional cost
    9/21/2015 and 9/22/2015 Monday and Tuesday 6:00 pm – 8:00 pm

    Adding fall bulbs to your landscaping for spring color. You will learn what bulbs will work in your landscape and which ones the deer do not eat. You will design the perfect spring bulb garden. Please bring pictures of your landscape the first night of class.

     

     


     

    HEALTH/MEDICAL PROFESSIONS

     
     

    1401-1 Nurse Assistant
    120 Hours
    Instructor: O. Hackett, RN, BSN, MSA
    Tuition: $850.00
    Additional costs: Textbook purchase and $75.00 material fee
    9/15/2015 – 1/10/2016 Tuesdays and Thursdays 5:30 pm – 9:30 pm. Clinical rotation will be held on Sundays 7:00 am - 3:30 pm beginning 11/29/2015
    Please call 570-629-2001 ext. 1125 for course availability and for special requirements and specific admission policies

     
     

    1401-2 Nurse Assistant
    120 Hours

    Instructor: O. Hackett, RN, BSN, MSA
    Tuition $850.00
    Additional costs: Textbook purchase and $75.00 material fee
    10/12/2015 – 2/6/2016 Mondays and Wednesdays 5:30 pm - 9:30 pm Clinical rotation will be held on Saturdays 7:00 am - 3:30 pm beginning 12/19/2015
    Please call 570-629-2001 ext. 1125 for course availability and for special requirements and specific admission policies

     

    1400 EKG Technician
    Prerequisite: Medical Terminology
    20 Sessions/60 Hours
    Instructor: P. Smith

    Tuition: $625.00
    Additional costs: Textbook purchase, $55.00 material fee and $10.00 caliper purchase
    10/19/2015 – 1/6/2015 Mondays and Wednesdays 6:00 pm - 9:00 pm
    This comprehensive course is designed for the serious student interested in the field of electrocardiography. Instruction includes anatomy and physiology of the cardiovascular system, electro-physiology of the conduction system, and basic EKG understanding. Students who successfully complete the course will be eligible to take the National EKG exam. The cost for exam is extra.

     

    1406-1 Office Medical Terminology
    11 Sessions/33 Hours
    Instructor: Staff
    Tuition: $255.00
    Additional cost: Textbook purchase
    8/31/2015 – 10/7/2015 Mondays and Wednesdays 6:00 pm - 9:00 pm
    This course is structured as a basic course in medical terms with insight into anatomy and physiology. Students will be able to break down, build, and understand the words of the medical professionals.

     

    1406-2 Office Medical Terminology
    11 Sessions/33 Hours
    Instructor: Staff
    Tuition: $255.00
    Additional cost: Textbook purchase
    11/3/2015 – 12/10/2015 Tuesdays and Thursdays 6:00 pm – 9:00 pm
    This course is structured as a basic course in medical terms with insight into anatomy and physiology. Students will be able to break down, build, and understand the words of the medical professionals

     

    1403 Phlebotomy Technician
    32 Sessions/112 Hours
    Instructor: D. Rivera-Acevedo
    Tuition: $800.00
    Additional cost: Textbook purchase and $105.00 material fee
    10/15/2015 – 2/23/2016 Tuesdays and Thursdays 6:00 pm – 9:30 pm
    Course curriculum involves theory and hands-on lab which includes vein puncture on lab partners as well as extended anatomy and physiology related to phlebotomy. Students are prepared for employment in a variety of medical settings. Students who successfully complete the course may be eligible to take the national test given by the National Healthcare Association.

     

    1427 Clinical Medical Assistant
    25 Sessions/75 Hours
    Instructor: B. Campbell
    Tuition: $550.00
    Additional cost: Textbook purchase and $75.00 material fee
    10/14/2015 – 1/20/2016 Mondays and Wednesdays 6:00 pm – 9:00 pm
    In this course students will cover assistance with specific examinations, specialty examinations and procedures, and basic laboratory analysis such as urinalysis, urine pregnancy test, capillary punctures, hematology, blood chemistry and serology, medical microbiology, and throat cultures

     

    1402 Pharmacy Technician

    20 Sessions/60 Hours
    Instructor: Dr. T. Joyce
    Tuition: $700.00
    Additional cost: Textbook purchase
    09/14/2015 – 11/23/2015 Mondays and Thursdays 6:00 pm – 9:00 pm

    Pharmacy Technicians will be trained to perform according to the highest standards of professionalism. At the successful completion of this course, the student will complete an internship (100 hours) to qualify to sit for the national test given by the National Healthcare Association.

     

    Patient Care Technician Program

    By successfully completing of the following four classes in our Health and Medical Field: Nurse Assistant, Office Medical Terminology, EKG Technician and Phlebotomy Technician, you can earn the title of Patient Care Technician. Successful completion of the program qualifies the student for the Patient Care Technician Certificate of Completion. Please call 570-629-2001 ext. 1125 for more information


     

     

     

    LANGUAGE


     

    1300 Sign Language - Beginner

    8 Sessions/16 Hours
    Instructor: S. Antal
    Tuition: $130.00
    Additional cost: Textbook purchase
    9/23/2015 – 11/11/2015 Wednesdays 6:00 pm – 8:00 pm

    An introduction to the American Sign Language (ASL). Students will develop basic vocabulary skills necessary to communicate with the hearing impaired.

     

    1302 Sign Language - Advanced

    9 Sessions/18 Hours
    Instructor: M. Maranaro
    Tuition: $140.00
    Additional cost: Textbook purchase
    9/17/2015 – 11/19/2015 Thursdays 6:30 pm – 8:30 pm

    This course if for those students who have achieved a high degree of proficiency in American Sign Language.

     

    1303 ESL English as a Second Language

    8 Sessions/16 Hours
    Instructor: L. Lladoc
    Tuition: $150.00
    9/21/2015 – 11/9/2015 Mondays 7 pm – 9 pm

    This course is designed for students with limited knowledge of English. It integrates the basic skills of listening, speaking, reading and writing English. Students will practice these skills by working through various classroom activities that require interaction and numerous applications of these basic skills in problem-solving situations.

     

     

     



    TRADES

     
     

    1119 Build a Deck
    6 Sessions/21 Hours
    Instructor: J. Pandolfo
    Tuition: $150.00
    Additional cost: $65.00 material fee
    10/1/2015 – 11/12/2015 Thursdays 6:00 pm - 9:30 pm
    This hands on class will cover all aspects of deck construction from the design layout and building codes to the actual construction from footers to deck railing.

     

    1117 Carpentry Framing
    10 Sessions/35 Hours
    Instructor: J. Pandolfo
    Tuition: $280.00
    Additional cost: $75.00 material fee
    10/6/2015 – 12/22/2015 Tuesdays 6:00 pm - 9:30 pm
    The student will learn basic framing and construction techniques with demonstrations in a relaxed atmosphere. This is a hands-on class focusing on framing.

     

    1120 Carpentry Tools
    6 Sessions/21 Hours
    Instructor: J. Pandolfo
    Tuition: $150.00
    Additional cost: $40.00 material fee
    12/3/2015 – 1/21/2016 Thursdays 6:00 pm - 9:30 pm
    Learn how to use all of the necessary tools in the carpentry trade: power tools, hand tools, and shop tools – from the basic drill to the wood planer. Course includes a hands-on approach.

     

    1102 Plumbing*
    5 Sessions/17.5 Hours
    Instructor: J. Pandolfo
    Tuition: $200.00
    Additional cost: $85.00 material fee
    10/5/2015 – 11/2/2015 Mondays 6:00 pm - 9:30 pm
    This is a basic course for students wishing to enter or upgrade in the plumbing trade or for the homeowner making minor repairs and renovations around the home. The course will progress through the basic skills required to a working knowledge of residential plumbing. Building codes will also be covered.

     

    1103 Heating*
    5 Sessions/17.5 Hours
    Instructor: J. Pandolfo
    Tuition: $200.00
    Additional cost: $85.00 material fee
    11/30/2015 – 1/4/2016 Mondays 6:00 pm - 9:30 pm
    This is a basic course for students wishing to enter or upgrade in the plumbing trade or for the homeowner making minor repairs and renovations around the home. The course will progress through the basic skills required to a working knowledge of residential plumbing. Building codes will also be covered.

     

    1100 Building Maintenance I
    20 Sessions/70 Hours
    Instructor: J. Pandolfo
    Tuition: $850.00
    Additional cost: $110.00 material fee
    10/05/2015 – 2/29/2016 Mondays 6:00 pm - 9:30 pm
    Instructor will cover introduction to plumbing, heating, electrical wiring, motor control, carpentry and testing tools.

     

    1101 Building Maintenance II
    20 Sessions/70 Hours
    Instructor: J. Pandolfo
    Tuition: $850.00
    Additional cost: $110.00 material fee
    10/07/2015 – 3/22/2016 Wednesdays 6:00 pm - 9:30 pm
    Advanced classes in Level II will be on the subject of Plant Operations and Building Construction, items covered include hydraulics, pneumatics, process piping, oil burner overview, HVAC overview basic waste treatment, paperwork scheduling, job estimating, employee training, plan review and drawing and safety and code review.

     

    1103 HVAC (Heating, Ventilation and Air Conditioning)
    28 Sessions/98 Hours
    Instructor: W. Snell
    Tuition: $980.00
    Additional cost: $150.00 material fee, testing fee, textbook purchase
    10/01/2015 – 1/28/2016 Tuesdays and Thursdays 6:00 pm - 9:30 pm
    Students will learn the background and history of the HVAC/R industry, physical and chemical properties of materials, terminologies in energies (heating, cooling, thermal dynamics, electrical and light), refrigerant cycle, refrigerants and refrigeration systems, HVAC/R toolbox, and HVAC/R measuring devices. Brazing, charging techniques, recovery and evacuation and safety procedures will be taught. Students will also learn the proper use of a four-valve refrigerant manifold, the maintenance and proper use of a vacuum pump system, the practice of refrigerant and copper tubing braising with oxyacetylene torch, and destructive joint testing and inspection. Students will also receive hands-on practice using high-pressure nitrogen cylinders, various regulators (pressure and purge), proper use of the nitrogen system in HVAC/R technology and other HVAC/R methods. EPA 608 Universal Training included.

     

    1109 Intro to Precision Machining
    10 Sessions/25 Hours
    Instructor: J. Granahan
    Tuition: $250.00
    Additional cost: $50.00 material fee
    10/15/2015 – 11/24/2015 Tuesdays and Thursdays 6:00 pm – 8:30 pm

    This course will cover introduction to semi-precision and precision measurement, basic layout and bench work, introduction to vertical and horizontal band saw, introduction to the lathe, milling machine and CNC/Cad-Cam and 3D printing. Students will also learn safety and shop practices.

     

    0700 Residential House Wiring
    14 Sessions/42 Hours
    Instructor: J. Granahan
    Tuition: $350.00
    Additional cost: Textbook purchase and $60.00 material fee
    9/15/2015 – 1/5/2016 Tuesdays 6:30 pm – 9:30 pm

    This course is designed to prepare individuals to do basic wiring for both electrical service and telephone installation. Principles of AC electricity, use of meters, laws, terms, and tools common to the electrical industry will be studied.

     

    2150 Shielded Metal Arc Welding I
    8 Sessions/32 Hours
    Instructor: G. Smith
    Tuition: $300.00
    Additional cost: $90.00 material fee
    10/1/2015 – 11/3/2015 Tuesdays and Thursdays 5:00 pm - 9:00 pm

    This class teaches basic stick” welding for the beginner or for those wishing to refresh their skills. Students will receive instruction in preparing steel for welding using oxyacetylene cutting equipment, high speed grinders, and power wire brushes. Using 7018 and 6010 electrodes, students will also receive instruction in preparing and welding fillet and groove welds on steel plate in the flat and horizontal position. Students are required to purchase their own welding gloves, safety glasses, and all leather work boots. Students must use safety glasses, welding hood and gloves.


    2151 Shielded Metal Arc Welding II
    8 Sessions/32 Hours
    Instructor: G. Smith
    Tuition: $300.00
    Additional cost: $90.00 material fee
    11/5/2015 – 12/8/2015 Tuesdays and Thursdays 5:00 pm - 9:00 pm

    This course is designed for those who have the Level I course or for those with professional work experience. Students will receive welding instruction in vertical and overhead positions using electrodes on fillet and groove welds on steel plate. Students are required to purchase their own welding gloves, safety glasses, and all leather work boots. Students must use safety glasses, welding hood and gloves.

     

    2152 Gas Metal Arc Welding (M.I.G.)
    6 Sessions/24 Hours
    Instructor: G. Smith
    Tuition: $225.00
    Additional cost: $90.00 material fee
    12/10/2015 - 1/7/2015 Tuesday - Thursday 5:00 pm - 9:00 pm

    Students will receive instruction in basic MIG welding principles and practices, including common operational troubleshooting. Students will perform fillet and groove welds on steel, stainless steel, and aluminum in all positions. Principles and practices of plasma-arc cutting will also be covered. Students are required to purchase their own welding gloves, safety glasses, and all leather work boots. Students must use safety glasses, welding hood, and gloves.

     

    2153 Gas Tungsten Arc Welding (T.I.G.)
    6 Sessions/24 Hours
    Instructor: G. Smith
    Tuition: $225.00
    Additional cost: $90.00 material fee
    1/12/2016 – 1/28/2016 Tuesday - Thursday 5:00 pm - 9:00 pm

    Students receive instruction in basic TIG welding principles and practices, including common operational troubleshooting. Students will perform fillet and groove welds on steel, stainless steel, and aluminum in all positions. Principles and practices of plasma-arc cutting are covered. Students must purchase their own welding gloves, safety glasses, and all leather work boots. Students must use safety glasses, welding hood, and gloves.

     

    2154-1 Welding Certification Workshop & Test
    4 Sessions/ 16 Hours
    Instructor: G. Smith
    Tuition: $185.00
    Additional cost: $45.00 material fee and test fee
    2/1/2016 – 2/4/2015 Monday - Thursday 5:00 pm - 9:00 pm

    MCTI is a remote testing site for the American Welding Society through Welders Testing and Training Institute of Allentown, PA. We offer the opportunity to take certification plate testing in S.M.A.W., G.M.A.W., G.T.A.W., and F.C.A.W. This will be offered only once per semester. Test materials must be paid for at the time of registration. Class size is limited to five (5) participants. Students are required to purchase their own welding gloves, safety glasses, and all leather work boots. Students must use safety glasses, welding hood, and gloves. Test is given on final evening.

     

    2154-2 Welding Certification Workshop & Test
    4 Sessions/ 16 Hours
    Instructor: G. Smith
    Tuition: $185.00
    Additional cost: $45.00 material fee and test fee
    2/8/2016 – 2/11/2015 Monday - Thursday 5:00 pm - 9:00 pm

    MCTI is a remote testing site for the American Welding Society through Welders Testing and Training Institute of Allentown, PA. We offer the opportunity to take certification plate testing in S.M.A.W., G.M.A.W., G.T.A.W., and F.C.A.W. This will be offered only once per semester. Test materials must be paid for at the time of registration. Class size is limited to five (5) participants. Students are required to purchase their own welding gloves, safety glasses, and all leather work boots. Students must use safety glasses, welding hood, and gloves. Test is given on final evening