Fall 2026 Course Offerings

0210 Automotive Technology – Advanced Electrical
16 Sessions
Instructor: C. Snyder
Tuition: $550.00
Additional Cost: TBD
9/14/2026-11/9/2026 Mondays and Wednesdays 5:30 pm – 8:00 pm
This advanced course is designed to assist entry level automotive technicians to gain knowledge to further their career. Participants will master the interpretation of complex wiring diagrams and the analysis of modern vehicle communication networks. The curriculum emphasizes a "data-driven" approach, utilizing high-end diagnostic tools—including Digital Storage Oscilloscopes (lab scopes), advanced Scan Tool PIDs, and Power Probes—to pinpoint intermittent faults and mechanical failures within electrical circuits. Through a blend of technical theory and intensive hands-on lab exercises, technicians will learn to verify component failure before replacement, reducing "parts-darts" and increasing shop efficiency.  2 years of automotive industry experience is recommended for this course.  Pre-requisite of a valid PA State Driver's license. 

0208 PA Motor Vehicle Safety Inspection
Instructor: S. King
Tuition: $200.00
Additional Endorsements: $40.00
Monthly Tuesdays and Thursdays 6:00 pm – 10:00 pm
Requirement: Tuition paid in full at registration. Please specify the month you are interested in at time of registration.
This program is for those who seek certification from PA Department of Transportation as an inspection mechanic. This course is offered once a month pending adequate class enrollment. Students must have a valid license in the category in which certification is sought.

0208 PA Motor Vehicle Safety Inspection - RECERTIFICATION
Instructor: S. King
Tuition: $100.00 AND $89.99 for the baseline online test and 1 category.  Additional category is $9.99
Monthly Tuesdays and Thursdays 6:00 pm – 10:00 pm
Requirement: Tuition paid in full at registration.  
This program is for those who seek a re-certification from PA Department of Transportation as an inspection mechanic. Will join an existing state inspection class for the first two nights. During this time the student will be given a refresher and shown all new updates.  At the end of second night instructor will guide the student through the online enrollment process and show you how to take the online test. Students must have a current state inspection license, current driver’s license and students must bring a valid credit card for online payment. This course is offered once a month pending adequate class enrollment.

0206 PA Motor Vehicle Emissions Inspection
Instructor: S. King
Tuition: $180.00  AND $39.99 FOR THE ONLINE TEST
Monthly Mondays and Wednesdays 6:00 pm – 10:00 pm
Requirement: Tuition paid in full at registration.  
This program is for those who seek emissions certification from PA Department of Transportation as an emissions inspection mechanic. This course is offered once a month pending adequate class enrollment. Students must have a valid driver’s license.

0206 PA Motor Vehicle Emissions Inspection- RECERTIFICATION
Instructor: S. King
Tuition: $100.00 AND $79.99 FOR THE ONLINE TEST
Monthly on third night of class 6:00 pm – 10:00 pm
Requirement: Tuition paid in full at registration.  
Will join an existing emission class for the first 2 nights. During this time the student will be given a refresher and shown the updates . At the end of the second night the instructor will guide the student through the online enrollment process and show you how to take the online test. Students must have a current driver’s license and emission license and must bring a valid credit card for online payment. Students can recertify up to 6 months before expiration.

1600 Comprehensive Culinary Program 
Year-long Program – Call for information
Instructor: J. Picarello
Tuition: $2,800.00
Additional Cost: Textbook purchase and $610.00 Material Fee
10/12/2026-8/2027 Mondays and Tuesdays 5:30 pm – 8:30 pm
The curriculum and labs incorporate food safety and sanitation, knife skills, nutrition, cooking techniques, stocks, sauces, soups, meat, poultry, fish, dairy, pasta, vegetables, fruits, gardemanager, herbs, and dining room management, marketing, and menu preparation as well as the elements of restaurant practices.

1000 GED Preparation
12 Sessions
Instructor: Staff
Tuition: $285.00
Additional Cost: $50.00 Material Fee  
9/14/2026-12/7/2026 Mondays 5:30 pm – 8:30 pm
The GED Preparation class is an individual course that is tailored to the specific needs of each student. After a pre-test given on the first two nights, students are placed into an educational program based upon the placement testing.

0212 Small Engine Repair- Level I
8 Sessions
Instructor: C. Bruch
Tuition: $220.00
Additional Cost: $50.00 Material Fee
9/21/2026-10/14/2026 Mondays and Wednesdays 5:30 pm – 8:00 pm
Discover the trade secrets that will allow you to tune up or repair small 2 and 4 cycle engines. Lawn mowers, chain saws, weed eaters, and other small gasoline-powered equipment will be repaired during class time. Bring your problem machines with you.

Patient Care Technician Program
By successfully completing the following four classes in our Health and Medical Field: Nurse Aide, Office Medical Terminology, EKG Technician and Phlebotomy Technician, students earn the title of Patient Care Technician. Successful completion of the program qualifies the student for the Patient Care Technician Certificate of Completion. Please call 570-629-2001 ext. 1125 for more information

Clinical Medical Assistant Program
By successfully completing the following four classes in our Health and Medical Field: Office Medical Terminology, EKG Technician, Phlebotomy Technician, and Medical Assisting, students earn the title of Clinical Medical Assistant.  Successful completion of the program qualifies the student for the Clinical Medical Assistant Certificate of Completion. Please call 570-629-2001 ext. 1125 for more information

1400 EKG Technician
Prerequisite: Medical Terminology 
20 Sessions
Instructor: P. Fucci
Tuition: $725.00
Additional costs: Textbook purchase, and $45.00 lab fee
10/8/2027-12/17/2026 Tuesdays and Thursdays 6:00 pm – 9:00 pm
This comprehensive course is designed for the serious student interested in the field of electrocardiography. Instruction includes anatomy and physiology of the cardiovascular system, electro-physiology of the conduction system, and basic EKG understanding. Students who successfully complete the course may be eligible to take the national test given by the National Healthcare Association.  The cost for the exam is extra. 

1407 Emergency Medical Technician (EMT)
140 Hours 
Instructor: Staff 
Tuition: $1,400.00
Additional costs: Textbook purchase and  $75.00 Material Fee
8/3/2026-12/19/2026 Mondays and Wednesdays 6:00 pm – 9:00 pm Some daytime Saturdays
The Emergency Medical Technician (EMT) program will prepare students to provide out-of-hospital emergency medical care and transportation for critical and emergent patients. EMTs have the basic knowledge and skills necessary to stabilize and safely transport patients ranging from non-emergency and routine medical transports to life-threatening emergencies. EMTs function as part of a comprehensive EMS response system, under medical oversight. Emergency Medical Technicians perform interventions with the basic equipment typically found on an ambulance. Emergency Medical Technicians are a critical link between the scene of an emergency and the health care system.  At the successful completion of the EMT program, students are qualified to sit for their National Registry of Emergency Medical Technicians certification (Cost not included in class).

1427 Medical Assisting
Prerequisite: Medical Terminology 
27 Sessions
Instructor: A. Dassler
Tuition: $875.00
Additional cost: Textbook purchase and $100.00 lab fee
10/7/2026-1/27/2027 Mondays and Wednesdays 6:00 pm – 9:00 pm
In this course, students will learn to provide assistance with specific examinations, specialty examinations and procedures, and basic laboratory analysis such as urinalysis, urine pregnancy test, capillary punctures, hematology, blood chemistry and serology, medical microbiology, and throat cultures.

1406 Medical Terminology
11 Sessions
Instructor: Staff
Tuition: $275.00
Additional cost: Textbook purchase
7/13/2026-8/17/2026 Mondays and Wednesdays 6:00 pm – 9:00 pm
This course is structured as a basic course in medical terms with insight into anatomy and physiology. Students will be able to break down, build, and understand the words of the medical professionals.

1406-1 Medical Terminology
11 Sessions
Instructor: Staff 
Tuition: $275.00
Additional cost: Textbook purchase
8/20/2026-10/1/2025 Tuesdays and Thursdays 6:00 pm – 9:00 pm
This course is structured as a basic course in medical terms with insight into anatomy and physiology. Students will be able to break down, build, and understand the words of the medical professionals

1406-2 Medical Terminology
11 Sessions
Instructor: Staff 
Tuition: $275.00
Additional cost: Textbook purchase
1/11/2027-2/17/2027 Mondays and Wednesdays 6:00 pm – 9:00 pm
This course is structured as a basic course in medical terms with insight into anatomy and physiology. Students will be able to break down, build, and understand the words of the medical professionals

1402 Pharmacy Technician
20 Sessions
Instructor: Staff
Tuition: $700.00
Additional cost: Textbook purchase 
9/15//2026-11/24/2026 Tuesdays and Thursdays 6:00 pm – 9:00 pm
Pharmacy Technicians will be trained to perform according to the highest standards of professionalism. At the successful completion of this course, the student will qualify to sit for the national test given by the National Healthcare Association. The cost of the exam is extra.

1403 Phlebotomy Technician
Prerequisite: Medical Terminology 
32 Sessions
Instructor:  D. Rivera 
Tuition: $995.00
Additional cost: Textbook purchase and $200.00 lab fee
9/9/2026-1/18/2027 Mondays and Wednesdays 6:00 pm – 9:00 pm
Course curriculum involves theory and hands-on lab, which includes vein puncture on lab partners as well as extended anatomy and physiology related to phlebotomy. Students are prepared for employment in a variety of medical settings. Students who successfully complete the course may be eligible to take the national test given by the National Healthcare Association. The cost for the exam is extra. 

1300 Sign Language - Beginner
6 Sessions
Instructor: M. Marinaro
Tuition: $140.00
Additional cost: None
10/19/2026-11/23/2026 Mondays 5:00 pm – 6:30 pm
An introduction to the American Sign Language (ASL). Students will develop basic vocabulary skills necessary to communicate with the hearing impaired.

1302 Sign Language Advanced
6 Sessions
Instructor: M. Marinaro
Tuition: $140.00
Additional cost: None
12/7/2026-1/18/2027 Mondays 5:00 pm – 6:30 pm
This course is for those students who have achieved a high degree of proficiency in American Sign Language.

Building Maintenance Program 
By successfully completing the following three classes in our Building Trades Program:  Carpentry, Plumbing and Electrical, qualifies the student for the Building Maintenance Certificate of Completion. Please call 570-629-2001 ext. 1125 for more information

1107 Carpentry Level I
7 Sessions
Instructor: M. Bonno
Tuition: $355.00
Additional cost: $165.00 material fee 
CALL FOR INFORMATION
This is a basic course for students wishing to enter or upgrade in the carpentry trade or for the homeowner making minor repairs and renovations around the home. The course will progress through the basic skills required to a working knowledge of residential carpentry. Building codes will also be covered. 

1107 Carpentry Level II
7 Sessions
Instructor: M. Bonno
Tuition: $355.00
Additional cost: $165.00 material fee 
CALL FOR INFORMATION
This is a basic course for students wishing to enter or upgrade in the carpentry trade or for the homeowner making minor repairs and renovations around the home. The course will progress through the basic skills required to a working knowledge of residential carpentry. Building codes will also be covered

1102 Plumbing Level I
6 Sessions
Instructor: J. Hazelton
Tuition: $355.00
Additional cost: $165.00 material fee 
CALL FOR INFORMATION 
This is a basic course for students wishing to enter or upgrade in the plumbing trade or for the homeowner making minor repairs and renovations around the home. The course will progress through the basic skills required to a working knowledge of residential plumbing. Building codes will also be covered. This is one of the three required courses for Building Maintenance Certificate. 

1102-2 Plumbing-Level II
6 Sessions
Instructor: J. Hazelton
Tuition: $355.00
Additional cost: $165.00 material fee 
CALL FOR INFORMATION 
This is the advanced course for students who have already completed the plumbing section of Building Maintenance I.  This is one of the three required courses for Building Maintenance II Certificate. 

1104 Electrical – Level I
7 Sessions
Instructor: M. Witner
Tuition: $355.00
Additional cost: $165.00 material fee 
CALL FOR INFORMATION 
This is a basic course for students wishing to enter or upgrade in the electrical trade or for the homeowner making minor repairs and renovations around the home. The course will progress through the basic skills required to a working knowledge of residential electrical. Building codes will also be covered. 

1104 Electrical Level II
7 Sessions
Instructor: M. Witner
Tuition: $355.00
Additional cost: $165.00 material fee 
CALL FOR INFORMATION 
This is an advanced course for students who completed the electrical level I course.

1103 HVAC (Heating, Ventilation and Air Conditioning)
25 Sessions
Instructor: B. Chase
Tuition: $1,100.00
Additional costs: Material Fee: $150.00 AND Testing fee TBD, AND textbook purchase Cost TBD
CALL FOR INFORMATION 
Students will learn the background and history of the HVAC/R industry, physical and chemical properties of materials, terminologies in energies (heating, cooling, thermal dynamics, electrical and light), refrigerant cycle, refrigerants and refrigeration systems, HVAC/R toolbox, and HVAC/R measuring devices. Brazing, charging techniques, recovery and evacuation and safety procedures will be taught. Students will also learn the proper use of a four-valve refrigerant manifold, the maintenance and proper use of a vacuum pump system, the practice of refrigerant and copper tubing braising with oxyacetylene torch, and destructive joint testing and inspection. Students will also receive hands-on practice using high-pressure nitrogen cylinders, various regulators (pressure and purge), proper use of the nitrogen system in HVAC/R technology and other HVAC/R methods. EPA 608 Universal Training included.

2150 Shielded Metal Arc Welding I 
8 Sessions
Instructor: D. Roberts 
Tuition: $395.00
Additional cost: $160.00 material fee
9/8/2026-10/6/2026 Tuesdays and Thursdays 5:00 pm - 9:00 pm 
This class teaches basic “stick” welding for the beginner or for those wishing to refresh their skills. Students will receive instruction in preparing steel for welding using oxyacetylene cutting equipment, high speed grinders, and power wire brushes. Using 7018 and 6010 electrodes, students will also receive instruction in preparing and welding fillet and groove welds on steel plate in the flat and horizontal position. Students are required to purchase their own welding hood, gloves, safety glasses, and all leather work boots. Students must use safety glasses, welding hood and gloves.

2151 Shielded Metal Arc Welding II 
8 Sessions
Instructor: D. Roberts
Tuition: $395.00
Additional cost: $160.00 material fee
10/13/2026-11/5/2026 Tuesdays and Thursdays 5:00 pm - 9:00 pm 
This course is designed for those who have the Level I course or for those with professional work experience. Students will receive welding instruction in vertical and overhead positions using electrodes on fillet and groove welds on steel plate. Students are required to purchase their own welding hood, gloves, safety glasses, and all leather work boots. Students must use safety glasses, welding hood and gloves.

2152 Gas Metal Arc Welding (M.I.G.)
8 Sessions
Instructor:  D. Roberts
Tuition: $395.00
Additional cost: $160.00 material fee
11/12/2026-12/15/2026 Tuesdays and Thursdays 5:00 pm - 9:00 pm 
Students will receive instruction in basic MIG welding principles and practices, including common operational troubleshooting. Students will perform fillet and groove welds on steel, stainless steel, and aluminum in all positions. Principles and practices of plasma-arc cutting will also be covered. Students are required to purchase their own welding hood, gloves, safety glasses, and all leather work boots. Students must use safety glasses, welding hood, and gloves.

2153 Gas Tungsten Arc Welding (T.I.G.)
8 Sessions
Instructor: D. Roberts
Tuition: $395.00
Additional cost: $160.00 material fee 
1/5/2027-1/28/2027 Tuesdays and Thursdays 5:00 pm - 9:00 pm 
Students receive instruction in basic TIG welding principles and practices, including common operational troubleshooting. Students will perform fillet and groove welds on steel, stainless steel, and aluminum in all positions. Principles and practices of plasma-arc cutting are covered. Students must purchase their own welding hood, gloves, safety glasses, and all leather work boots. Students must use safety glasses, welding hood, and gloves.

2154-1 Welding Certification Workshop & Test
4 Sessions
Instructor: D. Roberts
Tuition: $235.00
Additional cost: $80.00 material fee and test fee for the WTTI
2/1/2027-2/4/2027 Monday - Thursday 5:00 pm - 9:00 pm 
MCTI is a remote testing site for the American Welding Society through Welders Testing and Training Institute of Allentown, PA. We offer the opportunity to take certification plate testing in S.M.A.W., G.M.A.W., G.T.A.W., and F.C.A.W. This will be offered only once per semester. Test materials are an additional cost. . Class size is limited to seven (7) participants. Students are required to purchase their own welding hood, gloves, safety glasses, and all leather work boots. Students must use safety glasses, welding hood, and gloves. Test is given on final evening.