Registration opens August 19,2019

AUTOMOTIVE TECHNOLOGY

0209 Automotive Technology Level I
19 Sessions
Instructor: B. Wenzel
Tuition: $650.00
Additional Cost: Textbook purchase and $70.00 Material Fee
9/16/2019 – 11/20/2019 Mondays and Wednesdays 6:00 pm – 9:00 pm
Students will receive class theory and hands-on training in the following areas: Brake rotor/drum resurfacing and critical measurements, introduction to anti-lock brake systems and diagnostic procedures, intro to specialty measurement tools, diagnostic hand-held scanners as well as computerized engine control system and electronic and computerized ignition systems will be covered.

0210 Automotive Technology – Level II
22 Sessions/57 Hours
Instructor: B. Wenzel
Tuition: $650.00
Additional Cost: Textbook purchase and $125.00 Material Fee
11/25/2019 – 2/26/2020 Mondays and Wednesdays 6:00 pm – 9:00 pm
Advanced course will teach skills such as enhanced suspension systems, diagnosis and repair of ABS- Brakes and Stability Control. Electronic ignition diagnostics, basic computer system diagnostics, dealing with electrical system problems (including shorts, broken wires, and malfunctioning lights), changing tail light sockets. Engine performance diagnostics such as engine compression testing, engine vacuum testing and the use of hand held scanners. The students perform pre-delivery inspections on shop vehicles and repair faults they find wrong with each vehicle. Electrical trainers are used with meters, test lights and other diagnostic tools. If you like electronics and want to increase your diagnostic abilities then this class is for you!

0208 PA Motor Vehicle Safety Inspection
5 Sessions
Instructor: S. King
Tuition: $185.00
Additional Endorsements: $40.00
Monthly Tuesdays and Thursdays 6:00 pm - 10:00 pm
Requirement: Tuition paid in full at registration. Please specify the month you are interested in at time of registration.
This program is for those who seek certification from PA Department of Transportation as an inspection mechanic. This course is offered once a month pending adequate class enrollment. Students must have a valid license in the category in which certification is sought.

0208 PA Motor Vehicle Safety Inspection - RECERTIFICATION
2 Sessions
Instructor: S. King
Tuition: $100.00 AND $89.99 for the baseline online test and 1 category. Additional category is $9.99
Monthly Tuesdays and Thursdays 6:00 pm - 10:00 pm
Requirement: Tuition paid in full at registration. Please specify the month you are interested in at time of registration.
This program is for those who seek a re-certification from PA Department of Transportation as an inspection mechanic. Will join an existing state inspection class for the first two nights. During this time the student will be given a refresher and shown all new updates. At the end of second night instructor will guide the student through the online enrollment process and show you how to take the online test. Students must have a current state inspection license, current driver’s license and students must bring a valid credit card for online payment. This course is offered once a month pending adequate class enrollment

0206 PA Motor Vehicle Emissions Inspection
3 Sessions
Instructor: S. King
Tuition: $150.00 AND $39.99 for the online test.
Monthly Mondays and Wednesdays 6:00 pm - 10:00 pm
Requirement: Tuition paid in full at registration. Please specify the month you are interested in at time of registration.
This program is for those who seek emissions certification from PA Department of Transportation as an emissions inspection mechanic. This course is offered once a month pending adequate class enrollment. Students must have a valid driver’s license.

0206 PA Motor Vehicle Emissions Inspection- RECERTIFICATION
1 Session
Instructor: S. King
Tuition: $100.00 AND $79.99 for the online test
Monthly on third night of class 6:00 pm - 10:00 pm
Requirement: Tuition paid in full at registration. Please specify the month you are interested in at time of registration.
This program is for those who seek emissions a re-certification from PA Department of Transportation as an emissions inspection mechanic. This course is offered once a month pending adequate class enrollment. Students must have a current driver’s license and emission license. Students can recertify up to 6 months before expiration. Students are only required to attend the THIRD night of class.

CULINARY

0600 ServSafe & Certification Test
4 Sessions
Instructor: STAFF
Tuition: $185.00
Additional costs: Textbook AND online test purchase
10/14/2019 - 10/15/2019, 10/21/2019 and 10/28/2019 Mondays
and Tuesdays 6:00 – 9:00 pm
This is the complete certification training course designed by the National Restaurant Association and is the only certificate recognized by the state of Pennsylvania to conform to this standard.

1600 Comprehensive Culinary Program
Year-long Program
Instructor: D. Petruzzi
Tuition: $2,700.00
Additional Cost: Textbook purchase and $610.00 Material Fee
10/14//2019 – 8/2020 Mondays and Tuesdays 6:00 pm – 9:00 pm
The curriculum and labs incorporate food safety and sanitation, knife skills, nutrition, cooking techniques, stocks, sauces, soups, meat, poultry, fish dairy, pasta, vegetables, fruits, gardemanager, herbs and dining room management, marketing, and menu preparation as well as the elements of restaurant practices. These classes will be taught in specific modules or as a complete package.

ENRICHMENT

0108 Basic Guitar
14 Sessions
Instructor: G. Nance
Tuition: $200.00
9/25/2019 – 11/20/2019 Wednesdays and Thursdays 5:30 pm – 7:30 pm
This course is designed for both the beginner and the intermediate students. Learn basic chord structure, neck theory, and how to have fun with the guitar. Guitar is required.

0107 Basic Piano
14 Sessions
Instructor: G. Nance
Tuition: $200.00
9/25/2019 – 11/10/2019 Wednesdays and Thursdays 7:30 pm - 9:30 pm
Students will learn to read sheet music and play songs in various music styles. Continuous learning is applied with each lesson building upon the other. Bring your own keyboard or one will be supplied.

1606 Fall Soups
3 Sessions
Instructor: J. Picarello
11/6/2019 – 11/20/2019 Wednesdays 6:00 pm – 9:00 pm
Tuition: $90.00
Soups are one of winter’s best comfort foods that leave you feeling warm and full. In these sessions we will make french onion au gratin, cream of broccoli with cheddar, loaded baked potato and the classic chicken noodle.

1000 GED Preparation
12 Sessions
Instructor: M. Wilson
Tuition: $275.00
Additional Cost: Textbook purchase
10/14/2019 – 1/20/2020 Mondays 5:30 pm – 8:30 pm
The GED Preparation class is an individual course that is tailored to the specific needs of each student. After a pre-test given on the first two nights, students are placed into an educational program based upon the placement testing.

1295 Intro to Embroidery
6 Sessions
Instructor: Staff
Tuition: $120.00
Additional Cost: TBD
10/8/2019 – 10/31/2019 Tuesdays and Thursdays 5:30 pm – 7:30 pm
Basic learn-how-to-embroidery class. Beginners will learn the basics of starting a project, basic stitches and color changes.

0212 Small Engine Repair- Level I
5 Sessions
Instructor: B. Kohler
Tuition: $150.00
Additional Cost: $35.00 Material Fee
9/24/2019 -10/15/2019 Tuesdays and Thursdays 5:30 pm – 8:00 pm
Discover the trade secrets that will allow you to tune-up or repair small 2 and 4 cycle engines. Lawn mowers, chain saws, weed eaters, and other small gasoline powered equipment will be repaired during class time. Bring your problem machines with you.

0212 Small Engine Repair- Level II
Prerequisite: Small Engine Repair – Level I
8 Sessions
Instructor: B. Kohler
Tuition: $200.00
Additional Cost: $50.00 Material Fee
10/24/2019 – 11/21/2019 Tuesdays and Thursdays 5:30 pm – 8:00 pm
The second level of small engine will provide more in-depth instruction into internal combustion engines. Students will learn the internals of 2 and 4 stroke engines and carburetors as well as learn firsthand how to rebuild an engine. Students may bring their own equipment with the permission of the instructor.

HEALTH/MEDICAL PROFESSIONS

Patient Care Technician Program
By successfully completing the following four classes in our Health and Medical Field: Nurse Aide, Office Medical Terminology, EKG Technician and Phlebotomy Technician, you can earn the title of Patient Care Technician. Successful completion of the program qualifies the student for the Patient Care Technician Certificate of Completion. Please call 570-629-2001 ext. 1125 for more information.

Clinical Medical Assistant Program
By successfully completing the following four classes in our Health and Medical Field: Office Medical Terminology, EKG, Phlebotomy, and Medical Assisting you earn the title of Clinical Medical Assistant. Successful completion of the program qualifies the student for the Clinical Medical Assistant certificate. Please call 570-629-2001 ext. 1125 for more information.

1400 EKG Technician
Prerequisite: Medical Terminology
20 Sessions
Instructor: P. Fucci
Tuition: $625.00
Additional costs: Textbook purchase and $55.00 material fee and $10.00 caliper purchase
10/8/2019-1/7/2020 Tuesdays and Thursdays 6:00 pm - 9:00 pm
This comprehensive course is designed for the serious student interested in the field of electrocardiography. Instruction includes anatomy and physiology of the cardiovascular system, electro-physiology of the conduction system, and basic EKG understanding. Students who successfully complete the course will be eligible to take the National EKG exam. The cost for exam is extra.

Emergency Medical Technician (EMT)
140 Hours
Instructor: M. Barzev, BA, NRP
Tuition: $875.00
Additional costs: Textbook purchase and Material Fee TBD
10/1/2019-3/19/2020 Tuesdays and Thursdays 7:00 pm – 10:00 pm Some daytime Saturdays
The Emergency Medical Technician (EMT) program will prepare students to provide out of hospital emergency medical care and transportation for critical and emergent patients. EMTs have the basic knowledge and skills necessary to stabilize and safely transport patients ranging from non-emergency and routine medical transports to life threatening emergencies. EMTs function as part of a comprehensive EMS response system, under medical oversight. Emergency Medical Technicians perform interventions with the basic equipment typically found on an ambulance. Emergency Medical Technicians are a critical link between the scene of an emergency and the health care system. At the successful completion of the EMT program, students are qualified to sit for their National Registry of Emergency Medical Technicians certification (Cost not included in class).

1427 Medical Assisting
Prerequisite: Medical Terminology
25 Sessions
Instructor: B. Campbell
Tuition: $650.00
Additional cost: Textbook purchase and $100.00 material fee
10/7/2019-1/20/2020 Mondays and Wednesdays 6:00 pm – 9:00 pm
In this course students will cover assistance with specific examinations, specialty examinations and procedures, and basic laboratory analysis such as urinalysis, urine pregnancy test, capillary punctures, hematology, blood chemistry and serology, medical microbiology, and throat cultures

1401 Nurse Aide
120 Hours
Instructor: Marie Boland RN, BSN
Tuition: $950.00
Additional costs: Textbook purchase and $75.00 lab fee
10/8/2019-1/16/2020 Tuesdays and Thursdays 5:30 pm – 9:30 pm. Some clinical hours will be on Saturdays
Please call 570-629-2001 ext. 1125 for course availability and for special requirements and specific admission policies

1406-1 Office Medical Terminology
8 Sessions
Instructor: P. Fucci
Tuition: $255.00
Additional cost: Textbook purchase
9/10/2019 - 10/3/2019 Tuesdays and Thursdays 5:30 pm - 9:30 pm
This course is structured as a basic course in medical terms with insight into anatomy and physiology. Students will be able to break down, build, and understand the words of the medical professionals.

1406-2 Office Medical Terminology
11 Sessions
Instructor: P. Fucci
Tuition: $255.00
Additional cost: Textbook purchase
11/4/2019-12/11/2019 Mondays and Wednesdays 6:00 pm – 9:00 pm
This course is structured as a basic course in medical terms with insight into anatomy and physiology. Students will be able to break down, build, and understand the words of the medical professionals

1406-3 Office Medical Terminology
11 Sessions
Instructor: P. Fucci
Tuition: $255.00
Additional cost: Textbook purchase
1/7/2020- 2/11/2020 Tuesdays and Thursdays 6:00 pm – 9:00 pm
This course is structured as a basic course in medical terms with insight into anatomy and physiology. Students will be able to break down, build, and understand the words of the medical professionals

1402 Pharmacy Technician
22 Sessions
Instructor: T. Joyce Rph
Tuition: $700.00
Additional cost: Textbook purchase
10/15/2019-1/16/2020 Tuesdays and Thursdays 6:00 pm – 9:00 pm
Pharmacy Technicians will be trained to perform according to the highest standards of professionalism. Students who successfully complete the course may be eligible to take the national certification exam.

1403 Phlebotomy Technician
Prerequisite: Medical Terminology
32 Sessions
Instructor: D. Rivera
Tuition: $875.00
Additional cost: Textbook purchase and $175.00 material fee
10/14/2019 – 2/24/2020 Mondays and Wednesdays 6:00 pm – 9:00 pm
Course curriculum involves theory and hands-on lab which includes vein puncture on lab partners as well as extended anatomy and physiology related to phlebotomy. Students are prepared for employment in a variety of medical settings. Students who successfully complete the course may be eligible to take the national exam given by the National Healthcare Association.

LANGUAGE

1300 Sign Language - Beginner
6 Sessions
Instructor: S. Antal
Tuition: $120.00
Additional cost: Textbook purchase
9/12/2019 – 10/24/2019 Thursdays 6:00 pm – 8:00 pm
An introduction to the American Sign Language (ASL). Students will develop basic vocabulary skills necessary to communicate with the hearing impaired.

1302 Sign Language Advanced
8 Sessions
Instructor: M. Maranaro
Tuition: $130.00
Additional cost: Textbook purchase
10/9/2019-12/4/2019 Wednesdays 6:00 pm – 8:00 pm
This course is for those students who have achieved a high degree of proficiency in American Sign Language.

1303 ESL English as a Second Language – Level I
8 Sessions
Instructor: L. Lladoc
Tuition: $150.00
9/24/2019-10/24/2019 Tuesdays and Thursdays 6:00 pm – 8:00 pm
This course is designed for students with limited knowledge of English. It integrates the basic skills of listening, speaking, reading and writing English. Students will practice these skills by working through various classroom activities that require interaction and numerous applications of these basic skills in problem-solving situations.

1304 ESL English as a Second Language – Level II
8 Sessions
Instructor: L. Lladoc
Tuition: $150.00
10/29/2019-11/26/2019 Tuesdays and Thursdays 6:00 pm – 8:00 pm
This course is designed for students who completed ESL Level I. Students will continue practicing listening, speaking and reading skills by working through various classroom activities that require interaction and numerous applications of these skills in problem-solving situations.

TRADES

1100 Building Maintenance I
20 Sessions
Instructor: J. Pandolfo
Tuition: $900.00
Additional cost: $150.00 material fee
10/7/2019 – Spring 2020 Mondays 5:30 pm - 9:00 pm
Instructor will cover introduction to plumbing, heating, electrical wiring, motor control, carpentry and testing tools.

1100-2 Building Maintenance I
20 Sessions
Instructor: J. Pandolfo 
Tuition: $900.00
Additional cost: $150.00 material fee 
10/8/2019 – Spring 2020 Mondays 5:30 pm - 9:00 pm 
Instructor will cover introduction to plumbing, heating, electrical wiring, motor control, carpentry and testing tools.

1101 Building Maintenance II
20 Sessions
Instructor: J. Pandolfo
Tuition: $900.00
Additional cost: $150.00 material fee
10/2/2019 – Spring 2020 Wednesdays 5:30 pm - 9:00 pm
Advanced classes in Level II will be on the subject of Plant Operations and Building Construction, items covered include hydraulics, pneumatics, process piping, oil burner overview, HVAC overview basic waste treatment, paperwork scheduling, job estimating, employee training, plan review and drawing and safety and code review.

1102-1 Plumbing Level 1
5 Sessions
Instructor: J. Pandolfo
Tuition: $225.00
Additional cost: $85.00 material fee
10/7/2019 – 11/18/2019 Mondays 5:30 pm – 9:00 pm
This is a basic course for students wishing to enter or upgrade in the plumbing trade or for the homeowner making minor repairs and renovations around the home. The course will progress through the basic skills required to a working knowledge of residential plumbing. Building codes will also be covered. This is one of the four required courses for Building Maintenance Certificate.

1102-2 Plumbing Level 1
5 Sessions
Instructor: J. Pandolfo
Tuition: $225.00
Additional cost: $85.00 material fee
10/8/2019 – 11/19/2019 Tuesdays 5:30 pm – 9:00 pm
This is a basic course for students wishing to enter or upgrade in the plumbing trade or for the homeowner making minor repairs and renovations around the home. The course will progress through the basic skills required to a working knowledge of residential plumbing. Building codes will also be covered. This is one of the four required courses for Building Maintenance Certificate.

1113-1 Heating and Air Level I
9 Sessions
Instructor: J. Pandolfo
Tuition: $350.00
Additional cost: $110.00 material fee
12/9/2019 – 1/13/2020 Mondays 5:30 pm – 9:00 pm
This is a basic course for students wishing to learn the different heating systems found in today’s homes – some commercial systems will also be covered. This course will progress through the basic skills required for a working knowledge of residential heating. Course will also cover day to day/season to season maintenance of various A/C systems. Filters and mold issues will be covered as well as how to keep mold from forming. This is one of the four required courses for Building Maintenance Certificate.

1113-2 Heating and Air Level I
9 Sessions
Instructor: J. Pandolfo
Tuition: $350.00
Additional cost: $110.00 material fee
12/10/2019 – 1/14/2020 Tuesdays 5:30 pm – 9:00 pm
This is a basic course for students wishing to learn the different heating systems found in today’s homes – some commercial systems will also be covered. This course will progress through the basic skills required for a working knowledge of residential heating. Course will also cover day to day/season to season maintenance of various A/C systems. Filters and mold issues will be covered as well as how to keep mold from forming. This is one of the four required courses for Building Maintenance Certificate.

1107 Carpentry Level II
5 Sessions
Instructor: J. Pandolfo
Tuition: $225.00
Additional cost: $85.00 material fee
10/2/2019 - 11/6/2019 Wednesdays 5:30 pm- 9:00 pm
This is an advanced course for students who completed the carpentry level I course.

1104 Electrical Level II
5 Sessions
Instructor: J. Pandolfo
Tuition: $225.00
Additional cost: $85.00 material fee
12/4/2019 -1/8/2020 Wednesdays 5:30 pm – 9:00 pm
This is an advanced course for students who completed the electrical level I course.

1119 Commercial Maintenance Tech
Instructor: J. Pandolfo
Tuition: $1,200.00
Additional Cost: $200.00 material fee
10/3/2019 -Spring 2020 Thursdays 5:30 pm – 9:00 pm
This class is tailored to all levels of experience. Students will start with getting to know the trade tools and safety. Preventative maintenance (PM) will be covered and help explain why a PM schedule is so critical to keeping a facility running efficiently.
Each section of this program will start with a theory lesson, although the primary focus will be hands-on training. Classes in commercial plumbing, heating, and electric systems will prepare students to enter the workforce or enhance their current career. System troubleshooting, control wiring, motor replacement, sheetrock repair, painting, and woodworking will also be covered. Additional topics will include fire detection, facility retrofits, and hazardous waste/containment. As time allows we will take off the floor questions about things coming up in your day to day work place. The instructor will help get you to the right answer to solve your problem.
As part of this class students will take their OSHA 10, ladder safety, and forklift certifications.

1103 HVAC (Heating, Ventilation and Air Conditioning)
27 Sessions
Instructor: N. Stinger
Tuition: $980.00
Additional cost: $150.00 material fee, and testing fee TBD, and textbook purchase TBD
10/8/2019 – 1/30/2020 Tuesdays and Thursdays 6:00 pm – 9:30 pm
Students will learn the background and history of the HVAC/R industry, physical and chemical properties of materials, terminologies in energies (heating, cooling, thermal dynamics, electrical and light), refrigerant cycle, refrigerants and refrigeration systems, HVAC/R toolbox, and HVAC/R measuring devices. Brazing, charging techniques, recovery and evacuation and safety procedures will be taught. Students will also learn the proper use of a four-valve refrigerant manifold, the maintenance and proper use of a vacuum pump system, the practice of refrigerant and copper tubing braising with acetylene torch, and destructive joint testing and inspection. Students will also receive hands-on practice using high-pressure nitrogen cylinders, various regulators (pressure and purge), proper use of the nitrogen system in HVAC/R technology and other HVAC/R methods. EPA 608 Universal Training included.

WELDING

2150 Shielded Metal Arc Welding I
8 Sessions
Instructor: G. Smith
Tuition: $345.00
Additional cost: $110.00 material fee
10/1/2019-10/17/2019 Tuesdays, Wednesdays and Thursdays 5:00 pm - 9:00 pm
This class teaches basic stick” welding for the beginner or for those wishing to refresh their skills. Students will receive instruction in preparing steel for welding using oxyacetylene cutting equipment, high speed grinders, and power wire brushes. Using 7018 and 6010 electrodes, students will also receive instruction in preparing and welding fillet and groove welds on steel plate in the flat and horizontal position. Students are required to purchase their own welding gloves, safety glasses, and all leather work boots. Students must use safety glasses, welding hood and gloves.

2151 Shielded Metal Arc Welding II
8 Sessions
Instructor: G. Smith
Tuition: $345.00
Additional cost: $110.00 material fee
10/24/2019 -11/13/2019 Tuesdays, Wednesdays and Thursdays 5:00 pm - 9:00 pm
This course is designed for those who have the Level I course or for those with professional work experience. Students will receive welding instruction in vertical and overhead positions using electrodes on fillet and groove welds on steel plate. Students are required to purchase their own welding gloves, safety glasses, and all leather work boots. Students must use safety glasses, welding hood and gloves.

2152 Gas Metal Arc Welding (M.I.G.)
8 Sessions
Instructor: G. Smith
Tuition: $345.00
Additional cost: $110.00 material fee
11/14/2019-12/4/2019 Tuesdays, Wednesdays and Thursdays 5:00 pm - 9:00 pm
Students will receive instruction in basic MIG welding principles and practices, including common operational troubleshooting. Students will perform fillet and groove welds on steel, stainless steel, and aluminum in all positions. Principles and practices of plasma-arc cutting will also be covered. Students are required to purchase their own welding gloves, safety glasses, and all leather work boots. Students must use safety glasses, welding hood, and gloves.

2153 Gas Tungsten Arc Welding (T.I.G.)
8 Sessions
Instructor: G. Smith
Tuition: $345.00
Additional cost: $110.00 material fee
12/5/2019-1/2/2020 Tuesdays, Wednesdays and Thursdays 5:00 pm - 9:00 pm
Students receive instruction in basic TIG welding principles and practices, including common operational troubleshooting. Students will perform fillet and groove welds on steel, stainless steel, and aluminum in all positions. Principles and practices of plasma-arc cutting are covered. Students must purchase their own welding gloves, safety glasses, and all leather work boots. Students must use safety glasses, welding hood, and gloves.

2154-1 Welding Certification Workshop & Test
4 Sessions
Instructor: G. Smith
Tuition: $205.00
Additional cost: $55.00 material fee and test fee
1/6/2020-1/9/2020 Monday - Thursday 5:00 pm - 9:00 pm
MCTI is a remote testing site for the American Welding Society through Welders Testing and Training Institute of Allentown, PA. We offer the opportunity to take certification plate testing in S.M.A.W., G.M.A.W., G.T.A.W., and F.C.A.W. This will be offered only once per semester. Test materials must be paid for at the time of registration. Class size is limited to five (5) participants. Students are required to purchase their own welding gloves, safety glasses, and all leather work boots. Students must use safety glasses, welding hood, and gloves. Test is given on final evening.

2154-2 Welding Certification Workshop & Test
4 Sessions
Instructor: G. Smith
Tuition: $205.00
Additional cost: $55.00 material fee and test fee
1/13/2020-1/16/2020 Monday - Thursday 5:00 pm - 9:00 pm
MCTI is a remote testing site for the American Welding Society through Welders Testing and Training Institute of Allentown, PA. We offer the opportunity to take certification plate testing in S.M.A.W., G.M.A.W., G.T.A.W., and F.C.A.W. This will be offered only once per semester. Test materials must be paid for at the time of registration. Class size is limited to five (5) participants. Students are required to purchase their own welding gloves, safety glasses, and all leather work boots. Students must use safety glasses, welding hood, and gloves. Test is given on final evening.

Registration opens August 19,2019